 Features:
1. Under the condition or vacuum,the boiling point of raw material will decrease and make the pushing force become greater.Therefore for a ceratin amount of heat
2. The heat source of evaporation operation can adopts low pressure steam or used heat stea.
3. It can decrease the heat loss of evaporator.
4. The heat souce for operation of evaporation may be low pressure steam or surplus heat steam.
5. Before drying,the treament of disinfection may be carried out.During the peried of drying,there is no impurity material.
6.It belongs to static drier.So the shape of raw material to be dried can not be destroyed.
|
Technical Parameter£º
| Name/Parameter/Specification |
YZG-600 |
YZG-1000 |
YZG-1400A |
FZG-15 |
| inside size of chamber (mm) |
¦Õ600x976 |
¦Õ1000x1527 |
¦Õ1400x2054 |
1500x1400x1220 |
| outer size of chamber (mm) |
1135x810x1020 |
1693x1190x1500 |
2386x1675x1920 |
1513x1924x2060 |
| layers of baking shelf |
4 |
6 |
8 |
8 |
| layers of baking shelf(mm) |
81 |
102 |
102 |
122 |
| size of baking disk (mm) |
310x600x45 |
640x460x45 |
460x640x45 |
460x640x45 |
| number of baking disk |
4 |
12 |
32 |
32 |
| permitted pressure inside the pipe of baking shelf (MPa) |
¡Ü0.784(8kg/cm2) |
¡Ü0.784 |
¡Ü0.784 |
¡Ü0.784 |
emperature inside chamber
(¡æ) |
-35-150 |
-35-150 |
-35-150 |
-35-150 |
| vacuum inside chamber(MPa) |
-0.1 |
-0.1 |
-0.1 |
-0.1 |
| Under -0.1MPa and heating temperature is 110, the vaporization rate of water (kg/m2.h) |
7.2 |
7.2 |
7.2 |
7.2 |
| If using condenser, type and power of vacuum pump(kW) |
2x15A 2kW |
2x30A 3kW |
2x-70A 5.5kW |
2x-70A 5.5kW |
| If not using condenser, type and power of vacuum pump(kW) |
JZJS-70 7kW |
JZJS-70 7kW |
JZJS-70 7kW |
JZJS-70 7kW |
| weight of drying chamber(kg) |
250 |
800 |
1400 |
2100 |
| The special parameter also can be design according to the customers' requirement. |
|
|
|
