Summary:
SZG double cone vacuum dryer is a new type of drying equipment developed by our company in the technology of similar products in China, with a double cone vacuum belt / chain two elastic combination, so the equipment running smoothly. Specially designed tooling, fully embodies the two shafts of good concentric, thermal coal and vacuum systems are using a reliable mechanical seal or rotary joint. On the basis of this, we have developed SZG-A which can not only adjust, but also can carry out constant temperature control.
As a professional drying equipment factory, with more than 50 year we serve customers, our products for thermal coal from medium high temperature heat conducting oil, steam temperature and low temperature hot water drying viscous material, Goods are available in all varieties., the factory will be in the tank for your special design "copy board structure".
|
main features :
● The container is constantly rotating, and the heating surface of the material can be updated;
● Indirect heating, will not be contaminated;
● High thermal efficiency, more than 2 times higher than the average oven;
● The rotation speed of the container can be adjusted within the range of 3-13rpm;
● The constant temperature control temperature is displayed by the digital display.
|
main use:
This equipment is mainly used in medicine, chemical industry, food and other industries to carry out the following material drying:
● Recovery of residual volatile material;
● Material for recovering steam discharged during drying;
● Strong stimulation and toxic materials;
●Cannot withstand high temperature material;
● Easily oxidized material;
● Material that is not allowed to be damaged by a crystalline body;
|
technical parameter :
project |
Model
|
Name |
Company
|
100
|
200
|
350
|
500
|
750
|
1000
|
1500
|
2000
|
3000
|
4500
|
Total volume |
L
|
100
|
200
|
350
|
500
|
750
|
1000
|
1500
|
2000
|
3000
|
4500
|
Working volume |
L
|
50
|
100
|
175
|
250
|
375
|
500
|
750
|
1000
|
1500
|
2250
|
Heating area |
m2
|
1.16
|
1.5
|
2
|
2.63
|
3.5
|
4.61
|
5.58
|
7.5
|
9.6
|
13.8
|
speed |
rpm
|
3-13
|
3-13
|
3-13
|
3-13
|
3-13
|
3-13
|
3-13
|
3-13
|
3-10
|
3-8
|
power |
kw
|
0.8
|
1.1
|
1.5
|
1.5
|
2
|
3
|
3
|
4
|
5.5
|
7.5
|
Frame height |
mm
|
1600
|
1800
|
2000
|
2060
|
2270
|
2500
|
2800
|
3160
|
3500
|
4150
|
Weight |
kg
|
550
|
700
|
900
|
1100
|
1200
|
1300
|
1500
|
2000
|
3000
|
4000
|
Tank design pressure |
MPa
|
-0.1-0.15
|
Sandwich design pressure |
MPa
|
0.3
|
|
Schematic diagram of process installation :
This machine is the host equipment, need to be equipped with heating system, vacuum pump, condenser auxiliary device. (the factory can provide users with the equipment, please note that when ordering)
Recommended process placement: solvent recovery process placement
|
|
|