● DWD Seroes Belt Type Droer
|
Summary :
DWD series belt drier star combined with similar products at home and abroad advanced technology development and production of a new generation of belt type dryer, the device structure is more reasonable, more widely applicable. Stable and convenient operation, high thermal efficiency, widely used in chemical, pigments, dyes, mineral products, feed, food and other industries, is the ideal user reliable production equipment.
|
Working principle :
The material to be dried is passed through the proper feeding mechanism. The hot air is forced into the net belt and the material above and below the mesh belt. Each particle surface is dried to be heated surface, increasing the contact area between the material and the hot air increases the heat conduction area, and the water diffusion distance of the material is shortened. Therefore, the drying operation can be carried out very well, especially for the dry material to be dried after adding proper preparation. Therefore, it has high stability and high energy saving.
|
Characteristic :
▲ Suitable operating conditions can be set, according to the corresponding drying condition of ventilation mode, the operating conditions such as temperature and air volume can be adjusted.
▲ After adjusting the water, the water content of the processed products can be arbitrarily set, because the material stopping flow and the residence time in the drying device can be freely adjusted.
▲ Little damage to shape and dust, the material in the drying device, is still moving, almost without damaging the product shape, no dust flying.
▲ Can use a variety of conveyor belt. According to the different materials, the conveyor belt, in addition to all kinds of metal wire mesh, can also be used vibration plate.
▲ The conveyor belt can be cleaned, the heating chamber is separated from the drying chamber, and is convenient for cleaning and conveying belt.
▲ According to the requirements. A cleaning device can be assembled on the base plate of the device, and a small amount of material dropped on the bottom plate is sent to the discharging end.
▲ According to the yield material water is different, can choose a number of units in series, to increase production.
|
Application range :
▲Suitable for pigment, dye and other paste, paste material pre formed after the drying.
▲Suitable for polymer, iron, ferrite, fluorite, medicine, spices, agar and other chemical industry medicine, fertilizer, feed and various granular, flaky, fibrous, cake shaped object.
|
Structure (click to enlarge)
|
technical parameter :
Item \ model |
DWD1.2×8 |
DWD1.2×10 |
DWD1.6×8 |
DWD1.6×10 |
DWD2×8 |
DWD2×10 |
Dry area m2 |
9.6 |
12 |
12.8 |
16 |
16 |
20 |
Drying segment length * width m |
1.2×8 |
1.2×10 |
1.6×8 |
1.6×10 |
2×8 |
2×10 |
Unit number |
4 |
5 |
4 |
5 |
4 |
5 |
Use temperature ℃ |
50-150 |
Steam pressure MPa |
0.2-0.6 |
Steam consumption kg/h |
120-250 |
150-375 |
150-375 |
170-470 |
225-600 |
450-1200 |
drying time h |
0.2-1.5 |
0.25-1.5 |
0.2-1.5 |
0.25-1.5 |
0.2-1.5 |
0.25-1.5 |
Evaporation capacity kg/h2o |
60-160 |
80-220 |
75-220 |
95-220 |
100-260 |
120-300 |
Installed capacity kw |
9.25 |
11.75 |
12.55 |
15.75 |
16.55 |
20.75 |
Outline dimension |
L×N×H
(m) |
9.77×1.5×
2.83 |
11.77×1.5×
2.83 |
9.77×2.44×
2.83 |
11.77×2.44×
2.83 |
9.77×2.66×
3.50 |
11.77×2.66×
3.5 |
weight
|
4800
|
5780
|
5400
|
6650
|
6350
|
7800
|
Note: users in the selection, should be based on the output, material content and other parameters to choose 2 or more series of methods to increase the dry area, in order to meet the use requirements, improve product yield and quality.
Material name |
Pigment |
Ferrite |
Ferric oxide |
Anti biomass |
Seasoning |
feed |
Dry area m2 |
32 |
16 |
19 |
19.2 |
19.2 |
32 |
Material handling capacity kg/h |
312 |
533 |
533 |
1200 |
1200 |
1200 |
Material moisture |
65 |
60 |
80 |
35 |
35 |
60 |
Finished water % |
2 |
0.1 |
1.0 |
10 |
10 |
2 |
heat source |
steam 0.5MPa |
steam 0.5MPa |
steam 0.4MPa |
steam 0.7MPa |
steam 0.6MPa |
steam 0.6MPa |
Heat source consumption kg/h |
500 |
600 |
800 |
950 |
|
|
Front processor h |
|
|
|
|
700 |
900 |
Material shape |
|
|
|
|
Powdery |
Granular |
|
|
|