Summary：
Disc type continuous drying machine is a kind of efficient conductive type continuous drying equipment. The special structure and working principle determines that it has the characteristics of high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation, good operating environment, the drying operation is widely used in chemical, medicine, pesticide, food, feed, agricultural and sideline products processing industry. In all sectors of the practice by the use of. Is the production of manufacturing pressure, vacuum sealed, three types, 1200, 1500, 2200, 3000 and four specifications, A (carbon steel), B (the parts contact with material are made of stainless steel (C), on the basis of B, the increase of steam pipe, main shaft and bracket for stainless steel tube, stainless steel lining body and top cover three) material, dry area of 4 ~ 180m2, has formed a series of products, and can provide a variety of auxiliary equipment matched with the. Can meet the needs of users for a variety of materials drying.

Characteristic ：
( 一 ) Easy control, strong applicability
The drying process can be optimized by adjusting the thickness of the material layer, the speed of the spindle, the number of the rake arm, the form and the size of the rake. Each layer of drying plate can be separately through the hot medium or cold medium, the material is heated or cooled, the temperature of the material is accurate and easy to control. The residence time of the material can be adjusted accurately.
Material flow to a single, no back mixing phenomenon, dry uniform, stable quality, no need to mix.

( 二 ) Easy to operate, easy to operate
Dryer drive, parking is very simple.
When the feed is stopped, the rake leaves can quickly empty the material in the dryer.
Through a special large - size view of the door mirror, you can make a very fine inside the equipment cleaning and observation

( 三 ) Low energy consumption
The material layer is thin, the spindle speed is low and the material needs of the power transmission system is small, low power consumption.
The heat conduction is dried, the heat efficiency is high, and the energy consumption is low.

( 四 )Operating environment is good, can be recycled solvents, dust emissions meet the requirements
Atmospheric pressure: due to the low air flow rate, and the temperature distribution in the device is low, dust is difficult to float to the top of the equipment, so the top of the exhaust gas discharged from the exhaust gas contains almost no dust.
Sealed type: equipped with solvent recovery unit, can be easily recovered in the wet gas in the organic solvent. The solvent recovery device is simple, the recovery rate is high, and the material is flammable, explosive, toxic and easy to be oxidized, and the nitrogen can be used as the temperature carrier gas to carry out the closed circuit circulation. Especially suitable for the drying of flammable, explosive and toxic materials.
Vacuum type: disc dryer operation under vacuum condition, especially suitable for drying heat sensitive materials.

( 五 ) Easy installation, small floor area
Dryer overall factory, the overall transport, only lifting in place, the installation location is very easy.
Because of the drying plate type arrangement and the vertical installation, the drying area is large, and the occupied area is small.